2022 Toyota Camry Brakes Problems

Your forward collision warning sensor activates when you get too close to another vehicle, but when it does, your brake pedal becomes soft and unresponsive, and you hear rattling from the brakes. This has happened multiple times and only occurs when the sensor is triggered, making it difficult to brake properly. The issue may involve checking the brake sensor wiring, brake fluid pressure system, or the interaction between the collision avoidance system and your brakes.

Your brake booster failed, making it extremely difficult to stop your vehicle. This significantly reduces your braking power and creates a serious safety hazard. The brake booster will need to be replaced to restore normal braking function.

I was driving down a steep hill with two curves. Shortly before the first curve near the top of the hill I attempted to decelerate by pressing the brake pedal. There was no response whatsoever. I tried a couple times then realized that I had to do something different. I put the car into neutral and then actually reverse and nothing happened. I didn't hear the engine change or anything. I tried the e-parking brake to no avail. I then tried the power button for a few seconds. All the while hitting the brakes. By this time I was near the first big curve and had to steer. Given the terrain I didn't think I could drive onto a curb. After the second curve I was in the oncoming lane and noted a car coming up the hill towards me. I was able to change lanes and pump the brakes once or twice more as I got to the bottom of the hill at a high rate of speed. I plowed through the T Intersection and through a guardrail overlooking the a steep drop off to the farmland below and a ditch. Evidently I rolled the car at least once before coming to a stop and notifying emergency responders. The car is currently at the USAA lot waiting for an inspection by someone (figuring out who to engage). There was a general warning light on when I started the car shortly before the accident. I assumed it was due to condensation on cameras preventing the rear cross traffic sensors. The light went off when put into drive and I didn't have any other symptoms.